Melbourne / VIC Pickup • Australia-Wide Delivery Available

Need Help? Call us on 03 9720 7266 | [email protected]

Need Help? Call us on 03 9720 7266 | [email protected]

  • Gable Finial – F37570

    GABLE FINIAL – F37570

    Code: F37570

    Description

    Gable Finials are available in our period product range. Made from LOSP treated pine (environmentally friendly timber).

    Includes:

    • This finial is 750 long x 70 x 70mm.
    • Top turning = 425mm
    • Square section = 215mm.
    • Bottom turning = 110mm.
    Perfect for use on Entry Lychgates, Cubby houses, Carports, House gable, etc.

    Application

    Custom sizes catered for.

  • Gable Finial – F27570

    GABLE FINIAL – F27570

    Code: F27570

    Description

    Gable Finials are available in our period product range. Made from LOSP treated pine (environmentally friendly timber).

    Includes:

    • This finial is 750 long x 70 x 70mm.
    • Top turning = 325mm
    • Square section = 275mm.
    • Bottom turning = 150mm.
    Perfect for use on Entry Lychgates, Cubby houses, Carports, House gable, etc.

    Application

    Custom sizes catered for.

  • Gable Finial – F17570

    GABLE FINIAL – F17570

    Code: F17570

    Description

    Gable Finials are available in our period product range. Made from LOSP treated pine (environmentally friendly timber).

    Includes:

    • This finial is 750 long x 70 x 70mm.
    • Top turning = 250mm
    • Square section = 400mm.
    • Bottom turning = 100mm.
    Perfect for use on Entry Lychgates, Cubby houses, carports etc.

    Application

    Custom sizes catered for.

  • Gable Finial – F31570

    GABLE FINIAL – F31570

    Code: F31570

    Description

    Gable Finials are available in our period product range. Made from LOSP treated pine (environmentally friendly timber).

    Includes:

    • This finial is 1500 long x 70 x 70mm.
    • Top turning = 425mm
    • Square section = 965mm.
    • Bottom turning = 110mm.
    Perfect for use on Entry Lychgates, Cubby houses, Carports, House gable, etc.

    Application

    Custom sizes catered for.

  • Gable Finial – F21570

    GABLE FINIAL – F21570

    Code: F21570

    Description

    Gable Finials are available in our period product range. Made from LOSP treated pine (environmentally friendly timber).

    Includes:

    • This finial is 1500 long x 70 x 70mm.
    • Top turning = 325mm
    • Square section = 1025mm.
    • Bottom turning = 150mm.
    Perfect for use on Entry Lychgates, Cubby houses, Carports, House gable, etc.

    Application

    Custom sizes catered for.

  • Gable Finial – F11570

    GABLE FINIAL – F11570

    Code: F11570

    Description

    Gable Finials are available in our period product range. Made from LOSP treated pine (environmentally friendly timber).

    Includes:

    • This finial is 1500 long x 70 x 70mm.
    • Top turning = 250mm
    • Square section = 1150mm.
    • Bottom turning = 100mm.
    Perfect for use on Entry Lychgates, Cubby houses, Carports, House gable, etc.

    Application

    Custom sizes catered for.

  • Timber Louvres – TIML

    TIMBER LOUVRES – TIML

    Code: TIML

    Description

    Our timber fixed Louvers are perfect for keeping out the rain as well as direct sunlight whilst still admitting light and air. Made from LOSP Treated Pine - Which has 25 year guarantee against rot, fungal decay and insect attack (see our FAQs for more details on painting).

    Includes:

    • Silver Top Ash: Complies with the BAL 29 fire rating -Cedar.

    The illustration shows 1 way of using block louver panels above the door allowing for ventilations. The general use is for verandahs for privacy, air flows and shade.

    STANDARD SIZE:

    • 85mm by 17mm slats / 90mm by 42mm frame.
    • Supplied in a flat pack or manufactured as a full panel.

    Application

    Custom sizes available.

  • Window & Door Shutters – WDSH

    WINDOW / DOOR SHUTTERS – WDSH

    Code: WDSH

    Description

    Our timber Windows & Door Shutters are perfect for keeping out the rain as well as direct sunlight whilst still admitting light and air. Made from LOSP Treated Pine - Which has 25 year guarantee against rot, fungal decay and insect attack (see our FAQs for more details on painting).

    Includes:

    • Silver Top Ash: Complies with the BAL 29 fire rating -Cedar

    The illustration shows 1 way of using block louver panels above the door allowing for ventilations. The general use is for verandahs for privacy, air flows and shade.

    Application

    Matching service available custom sizes available

  • Complete DIY Stair Kit – KMSKIT

    COMPLETE DIY STAIR KIT – KMSKIT

    Code: KMSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 42mm MERBAU.

    Includes:

    • Stringers, Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • Complete DIY stair kit – KMPRSKIT

    COMPLETE DIY STAIR KIT – KMPRSKIT

    Code: KMPRSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 290 x 42mm MERBAU.

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • 1-18 Tread pair domestic use stringers with Batten screws – KMSTAIR1

    1-18 TREAD PAIR DOMESTIC USE STRINGERS WITH BATTEN SCREWS – KMSTAIR1

    Code: KMSTAIR1

    Description

    These Stringers are available within our Domestic Stair range.

    Includes:

    • This item includes pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 240 x 42mm MERBAU 1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 340mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • TREADS NOT INCLUDED.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These stringers are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KMSKIT. Custom made height rises also available.

  • 1-18 Tread Pair Domestic Use Stringers with Batten Screws

    1-18 TREAD PAIR DOMESTIC USE STRINGERS WITH BATTEN SCREWS

    Code: KLSTAIR1

    Description

    These Stringers are available within our Domestic Stair range.

    Includes:

    • Pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 240 x 45mm LOSP pine (environmentally friendly timber).
    • 1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 340mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • TREADS NOT INCLUDED.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These stringers are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KLSKIT. Custom made height rises also available.

  • Complete DIY stair kit – 290mm tread to suit commercial and residential use

    COMPLETE DIY STAIR KIT – 290MM TREAD TO SUIT COMMERCIAL AND RESIDENTIAL USE

    Code: KLPRSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 290 x 45mm LOSP TREATED PINE (Environmentally friendly timber).

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • Complete DIY stair kit – 240mm tread to suit residential use

    COMPLETE DIY STAIR KIT – 240MM TREAD TO SUIT RESIDENTIAL USE

    Code: KLSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 45mm LOSP TREATED PINE (Environmentally friendly timber).

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • 1-17 tread – Premium pair stair stringers with Batton Screws – KLPRSTAIR1

    1-17 TREAD – PREMIUM PAIR STAIR STRINGERS WITH BATTON SCREWS – KLPRSTAIR1

    Code: KLPRSTAIR1

    Description

    These Stringers are available within our Premium Stair range.

    Includes:

    • This item includes pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 290 x 45mm LOSP pine (environmentally friendly timber).
    • 1 x pair of 1 tread Stringers Included HEIGHT 330mm.
    • DISTANCE FROM ELEVATED PLATFORM 380mm
    • 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • TREADS NOT INCLUDED.
    • ASSEMBLY INSTRUCTIONS INCLUDED.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KLPRSKIT Custom made height rises also available.

  • 1 – 17 Tread Premium pair stair stringers with Batton Screws – KMPRSTAIR1

    1 – 17 TREAD PREMIUM PAIR STAIR STRINGERS WITH BATTON SCREWS – KMPRSTAIR1

    Code: KMPRSTAIR1

    Description

    These Stringers are available within our Premium Stair range.

    Includes:

    • This item includes pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 290 x 45mm MERBAU
    • 1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 380mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • TREADS NOT INCLUDED.
    • ASSEMBLY INSTRUCTIONS INCLUDED.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KMPRSKIT. Custom made height rises also available.

  • 1 – 17 tread – Premium Stair Kit – KCPRKIT1

    1 – 17 TREAD – PREMIUM STAIR KIT – KCPRKIT1

    Code: KCPRKIT1

    Description

    These timber steps are available within our Premium Stair Kit range. This kit is easy to assemble, with all necessary parts included. Made using 290 x 45mm LOSP Pine (environmentally friendly timber) Stringers (sides)

    Includes:

    • Included 1 Step (tread) Height 330mm Distance from elevated platform 380mm.
    • Full kit 2 x stringers (sides) with housing joints Treads (steps) number as required.
    • Aluminium stair nosing attached with non-slip tape applied in black (tape interchangeable).
    • Galvanised 10mm booker (threaded) rod with flush cap nuts.
    • 2 x Galvanised angle brackets for each tread with 12 /12g x 30mm HEX HEAD.
    • Screws per tread Internal step width = 945mm.
    • Complete external width = 1035mm.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • Flight Balustrade – Right Side – KMFLIGHTR

    FLIGHT BALUSTRADE – RIGHT SIDE – KMFLIGHTR

    Code: KMFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Flight balustrade – Left side – KMFLIGHTL

    FLIGHT BALUSTRADE – LEFT SIDE – KMFLIGHTL

    Code: KMFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Flight Balustrade – Right side – KLFLIGHTR

    FLIGHT BALUSTRADE – RIGHT SIDE – KLFLIGHTR

    Code: KLFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Flight Balustrade – Left side – KLFLIGHTL

    FLIGHT BALUSTRADE – LEFT SIDE – KLFLIGHTL

    Code: KLFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Placeholder

    FLIGHT BALUSTRADE NEWEL POST – KLFPOSTS1200

    Code: KLFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using LOSP Pine (environmentally friendly timber).

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KMFPANELR

    Code: KMFPANELR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KMFPANELL

    Code: KMFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KLFPANELR

    Code: KLFPANELR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KLFPANELL

    Code: KLFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Placeholder

    FLIGHT BALUSTRADE NEWEL POST – KMFPOSTS1200

    Code: KMFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using MERBAU.

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
  • Complete DIY stair kit – KCSKIT

    COMPLETE DIY STAIR KIT – KCSKIT

    Code: KCSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 45mm CCA PINE.

    Includes:

    • Stringers.
    • Treads and sawtooth – when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
      • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.
  • 1-18 Tread pair domestic use stringers with Batten screws – KCSTAIR1

    1-18 TREAD PAIR DOMESTIC USE STRINGERS WITH BATTEN SCREWS – KCSTAIR1

    Code: KCSTAIR1

    Description

    These Stringers are available within our Domestic Stair range.

    Includes:

    • This item includes pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 240 x 45mm CCA PINE.
    • 1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 340mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • Treads Not included.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KCSKIT. Custom made height rises also available.

  • Aluminium Stair Nosing – AL1160

    ALUMINIUM STAIR NOSING – AL1160

    Code: AL1160

    Description

    Our Non-slip, Aluminium Nosing for stair treads is Building Codes of Australia Complient. It is an easy way to add safety to any stairs. Made using Aluminium with self adhesive non-slip tape in yellow and black.

    Includes:

    • Approx 70mm top face.
    • Hangs 10mm down front of tread.
  • Window Pelmet – SB1WP

    WINDOW PELMET – SB1WP

    Code: SB1WP

    Description

    Our B1 style Window Pelmets are made using 18mm thick MDF. We cut each individual piece to your specifications. Nominate the width of your window from outside of frame to outside of frame.

    Includes:

    • Standard sizes are 400mm high.
    • Finished with a pine top plate.

    Application

    Other species of timber and custom sizes are available upon request.

  • 1- 18 Tread Sawtooth Centre Support – KLSAW1

    1- 18 TREAD SAWTOOTH CENTRE SUPPORT – KLSAW1

    Code: KLSAW1

    Description

    The Sawtooth Centre Supports are available within our Domestic Stair range.Made using 240 x 45mm LOSP pine (environmentally friendly timber).

    Includes:

    • 1 x 1 Tread Sawtooth TO SUIT 240 GOING x 165mm
    • STEP RISE 2 x Galvanised 5mm HEX drive Batten screws per tread included.
    • Treads Not Included
    • Assembly Instructions included.
    These centre supports are not commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. The Sawtooth’s are the perfect support for any staircase that will be over 1200mm wide.Great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • 1- 18 Tread Sawtooth Centre Support – KCSAW1

    1- 18 TREAD SAWTOOTH CENTRE SUPPORT – KCSAW1

    Code: KCSAW1

    Description

    The Sawtooth Centre Supports are available within our Domestic Stair range. Made using 240 x 45mm CCA PINE.

    Includes:

    • 1 x 1 Tread Sawtooth TO SUIT 240 GOING x 165mm
    • STEP RISE 2 x Galvanised 5mm HEX drive Batten screws per tread included.
    • Treads Not Included
    • Assembly Instructions included.
    These centre supports are not commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. The Sawtooth’s are the perfect support for any staircase that will be over 1200mm wide.Great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • 1-18 Tread Sawtooth Centre Support – KMSAW1

    1-18 TREAD SAWTOOTH CENTRE SUPPORT – KMSAW1

    Code: KMSAW1

    Description

    The Sawtooth Centre Supports are available within our Domestic Stair range.

    Includes:

    • Made using 240 x 42mm MERBAU 1 x 1 Tread Sawtooth TO SUIT 240 GOING x 165mm
    • STEP RISE 2 x Galvanised 5mm HEX drive Batten screws per tread included.
    • Treads Not Included
    • Assembly Instructions included.
    These centre supports are not commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. The Sawtooth’s are the perfect support for any staircase that will be over 1200mm wide.Great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • Kensington Gate

    Kensington Gate

    Code: KENSINGTON

    Description

    We sell a range of period style heritage & decorative timber gates. All our gates are custom made in Australia to meet your specific size and style requirements. We use high quality timber that comes with an extensive warranty period.

    Application

    MADE TO ORDER - CALL FOR A QUOTE.

  • Hawthorne Gate

    Hawthorne Gate

    Code: HAWTHORNE

    Description

    We sell a range of period style heritage & decorative timber gates. All our gates are custom made in Australia to meet your specific size and style requirements. We use high quality timber that comes with an extensive warranty period.

    Application

    MADE TO ORDER - CALL FOR A QUOTE.

Go to Top