Get in touch1300 547 581
Get in touch[email protected]
Made to measure in Bayswater · Shipped Australia-wide · Pickup available 03 9720 7266

Merbau & Kwila Timber Stair Kits

3 products

About this range

Merbau timber stair kits
Merbau stair kits, cut in our Bayswater workshop and delivered Australia-wide. Merbau is a dense hardwood, and it is the timber people choose when the stairs are the first thing you see and they have to keep looking right.
There are two tread depths. 240 × 42mm Merbau is the residential kit (KMSKIT, KMSTAIR1). 290 × 42mm and 290 × 45mm Merbau is the Premium range (KMPRSKIT, KMPRSTAIR1), which is BCA compliant with a 290mm tread to suit commercial and residential use.
Merbau is one of the bushfire-resisting timbers listed in AS 3959 — the standard that governs building in designated bushfire-prone areas — which makes it suitable for BAL 29 construction. If your property carries a BAL rating, say so when you order and we will build in the timber that suits it. Whether a finished flight complies depends on how the whole thing is built, so tell us the rating and we will work it through with you rather than guess.
Kits are made to your rise. Custom height rises are available and widths run from 900mm to 2400mm — a staircase has to land where the ground is, and the ground is rarely where a standard kit assumes.
See also our commercial 290mm Premium stairs, external timber stairs, and timber balustrades.
Get a quote, or call the workshop on (03) 9720 7266.

The three Merbau products
The KMSKIT is the complete 240 mm residential kit from $366.97: 240 x 42 mm Merbau stringers, treads, a sawtooth once the flight is over 1200 mm wide, four galvanised batten screws per tread and the instructions. The KMPRSKIT is the 290 mm Premium kit in 290 x 42 mm Merbau from $453.58, for commercial and residential use. The KMSTAIR1 is the 240 mm stringer pair from $241.62 for a builder supplying the treads; each tread stands 330 mm high and 340 mm out.
Merbau sawtooth, balustrade and newels
A wide Merbau flight takes the Merbau sawtooth centre support (240 x 42 mm, from $98.52), and the railing is the Merbau flight balustrade, pre-assembled for 2 to 18 steps with 88 x 88 x 1200 mm Merbau newel posts, two coach bolts per post. Ordering the stair, the sawtooth and the balustrade in the same timber keeps the flight one colour as it weathers.
Why Merbau for an outdoor stair
Merbau is a dense hardwood, and hardwood is the timber our treated-pine guide points to for stair treads and stringers where the stair is the first thing seen and has to keep looking right; it is also the timber we list for a bushfire-rated site. The Merbau Premium stringers for the 290 mm tread are under Premium stairs. Where the stair is a back deck in a sheltered spot, the treated pine kits are the cheaper tool.
Sizing and ordering a Merbau flight
Measure the rise from the landing to the ground and the width, then use the stair calculator to turn the rise into treads; the stair rise options page shows how far a 240 mm or 290 mm going lands from the deck. Flights are quoted to the rise, made in Bayswater, usually in 2 to 3 weeks and up to 4, and delivered to every state, with interstate freight for stringers arranged with you after ordering.

Buying and measuring questions (2)
What do I send for a Merbau stair kit quote?

Provide the finished rise, available run and preferred stair width. Include site photos and tell us whether you need a full kit or replacement components.

How can I compare the layout of two Merbau stair options?

Use the Stair Calculator to compare indicative rises, treads and run. Have your installer confirm which layout suits the opening and the components being ordered.