Get in touch1300 547 581
Get in touch[email protected]
Made to measure in Bayswater · Shipped Australia-wide · Pickup available 03 9720 7266

Merbau Stair Kit 240mm Tread, 1-18 Steps

$366.97 – $9,288.91

Need help with sizing or a custom order? Request a free quote.

240mm tread, Merbau

Not sure how many steps? Work it out from your floor-to-floor height with the stair calculator.

Request a quote

Your sizes not listed above? Please fill out this form below with your custom measurements and we will send you a quote within 2 business days. Thank you for your patience.

    SKU: KMSKIT Categories: , , Tags:
    About the Merbau Stair Kit 240mm Tread, 1-18 Steps

    Code: KMSKIT

    The complete DIY kits are available in any width from 900mm wide to 2400mm wide. And for any rise and run. Made using 240 x 42mm MERBAU.

    Includes:

    • Stringers, Treads and sawtooth – when over 1200mm wide.

    • 4 x Galvanised 5mm HEX drive Batten screws per tread.

    • Extra screws provided when sawtooths required.

    • Assembly Instructions included.

    These steps are NOT commercial grade but are Building Code of Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.

    • On timber decking or within any undulating landscape.

    Application

    Custom made height rises also available.

    The KMSKIT is the complete Merbau stair kit on a 240 mm tread: 240 x 42 mm Merbau stringers, the treads, a sawtooth centre support once the flight is over 1200 mm wide, four galvanised 5 mm hex-drive batten screws per tread and assembly instructions, from $366.97. It is BCA compliant for domestic use. Merbau is listed in AS 3959 as a bushfire-resisting timber suitable for BAL 29, which is why it is specified for stairs on a rated site. Quoted to your rise and width; the stair calculator sizes the flight. See the Merbau stair kits range.


    Pricing a Merbau stair against treated pine? This 240 mm tread kit is from $366.97, against $205.95 for the same kit in LOSP pine (KLSKIT), and every part is 240 x 42 mm Merbau.

    It covers 1 to 18 steps and any width from 900 mm to 2400 mm. In the box: stringers, treads, four galvanised 5 mm hex-drive batten screws per tread, instructions, and above 1200 mm wide a sawtooth centre support with its screws.

    These steps are Building Code of Australia (BCA) compliant for domestic use only, which is the residential 240 mm tread. The 290 mm Merbau kit (KMPRSKIT) is the version rated for commercial and residential use. Measuring help is on the stair rise options page.