Call Us Today! 1300 547 581|info@karemwoodcraft.com.au
Loading...
  • Flight Balustrade – Left side – KLFLIGHTL

    FLIGHT BALUSTRADE – LEFT SIDE – KLFLIGHTL

    Code: KLFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
    Details
  • Flight Balustrade – Right side – KLFLIGHTR

    FLIGHT BALUSTRADE – RIGHT SIDE – KLFLIGHTR

    Code: KLFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
    Details
  • Flight balustrade – Left side – KMFLIGHTL

    FLIGHT BALUSTRADE – LEFT SIDE – KMFLIGHTL

    Code: KMFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
    Details
  • Flight Balustrade – Right Side – KMFLIGHTR

    FLIGHT BALUSTRADE – RIGHT SIDE – KMFLIGHTR

    Code: KMFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
    Details
  • 1 – 17 tread – Premium Stair Kit – KCPRKIT1

    1 – 17 TREAD – PREMIUM STAIR KIT – KCPRKIT1

    Code: KCPRKIT1

    Description

    These timber steps are available within our Premium Stair Kit range. This kit is easy to assemble, with all necessary parts included. Made using 290 x 45mm LOSP Pine (environmentally friendly timber) Stringers (sides)

    Includes:

    • Included 1 Step (tread) Height 330mm Distance from elevated platform 380mm.
    • Full kit 2 x stringers (sides) with housing joints Treads (steps) number as required.
    • Aluminium stair nosing attached with non-slip tape applied in black (tape interchangeable).
    • Galvanised 10mm booker (threaded) rod with flush cap nuts.
    • 2 x Galvanised angle brackets for each tread with 12 /12g x 30mm HEX HEAD.
    • Screws per tread Internal step width = 945mm.
    • Complete external width = 1035mm.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
  • 1 – 17 Tread Premium pair stair stringers with Batton Screws – KMPRSTAIR1

    1 – 17 TREAD PREMIUM PAIR STAIR STRINGERS WITH BATTON SCREWS – KMPRSTAIR1

    Code: KMPRSTAIR1

    Description

    These Stringers are available within our Premium Stair range.

    Includes:

    • This item includes pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 290 x 45mm MERBAU
    • 1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 380mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • TREADS NOT INCLUDED.
    • ASSEMBLY INSTRUCTIONS INCLUDED.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KMPRSKIT. Custom made height rises also available.

    Details
  • 1-17 tread – Premium pair stair stringers with Batton Screws – KLPRSTAIR1

    1-17 TREAD – PREMIUM PAIR STAIR STRINGERS WITH BATTON SCREWS – KLPRSTAIR1

    Code: KLPRSTAIR1

    Description

    These Stringers are available within our Premium Stair range.

    Includes:

    • This item includes pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 290 x 45mm LOSP pine (environmentally friendly timber).
    • 1 x pair of 1 tread Stringers Included HEIGHT 330mm.
    • DISTANCE FROM ELEVATED PLATFORM 380mm
    • 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • TREADS NOT INCLUDED.
    • ASSEMBLY INSTRUCTIONS INCLUDED.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KLPRSKIT Custom made height rises also available.

    Details
  • Complete DIY stair kit – 240mm tread to suit residential use

    COMPLETE DIY STAIR KIT – 240MM TREAD TO SUIT RESIDENTIAL USE

    Code: KLSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 45mm LOSP TREATED PINE (Environmentally friendly timber).

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
  • Complete DIY stair kit – 290mm tread to suit commercial and residential use

    COMPLETE DIY STAIR KIT – 290MM TREAD TO SUIT COMMERCIAL AND RESIDENTIAL USE

    Code: KLPRSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 290 x 45mm LOSP TREATED PINE (Environmentally friendly timber).

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
  • 1-18 Tread Pair Domestic Use Stringers with Batten Screws

    1-18 TREAD PAIR DOMESTIC USE STRINGERS WITH BATTEN SCREWS

    Code: KLSTAIR1

    Description

    These Stringers are available within our Domestic Stair range.

    Includes:

    • Pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 240 x 45mm LOSP pine (environmentally friendly timber).
    • 1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 340mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • TREADS NOT INCLUDED.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These stringers are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KLSKIT. Custom made height rises also available.

    Details
  • 1-18 Tread pair domestic use stringers with Batten screws – KMSTAIR1

    1-18 TREAD PAIR DOMESTIC USE STRINGERS WITH BATTEN SCREWS – KMSTAIR1

    Code: KMSTAIR1

    Description

    These Stringers are available within our Domestic Stair range.

    Includes:

    • This item includes pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 240 x 42mm MERBAU 1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 340mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • TREADS NOT INCLUDED.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These stringers are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KMSKIT. Custom made height rises also available.

    Details
  • Complete DIY stair kit – KMPRSKIT

    COMPLETE DIY STAIR KIT – KMPRSKIT

    Code: KMPRSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 290 x 42mm MERBAU.

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
Go to Top