Melbourne / VIC Pickup • Australia-Wide Delivery Available

Need Help? Call us on 03 9720 7266 | [email protected]

Need Help? Call us on 03 9720 7266 | [email protected]

  • Complete DIY stair kit – KCSKIT

    COMPLETE DIY STAIR KIT – KCSKIT

    Code: KCSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 45mm CCA PINE.

    Includes:

    • Stringers.
    • Treads and sawtooth – when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
      • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.
  • Placeholder

    FLIGHT BALUSTRADE NEWEL POST – KMFPOSTS1200

    Code: KMFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using MERBAU.

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KLFPANELL

    Code: KLFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KLFPANELR

    Code: KLFPANELR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KMFPANELL

    Code: KMFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KMFPANELR

    Code: KMFPANELR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Placeholder

    FLIGHT BALUSTRADE NEWEL POST – KLFPOSTS1200

    Code: KLFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using LOSP Pine (environmentally friendly timber).

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
  • Flight Balustrade – Left side – KLFLIGHTL

    FLIGHT BALUSTRADE – LEFT SIDE – KLFLIGHTL

    Code: KLFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Flight Balustrade – Right side – KLFLIGHTR

    FLIGHT BALUSTRADE – RIGHT SIDE – KLFLIGHTR

    Code: KLFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Flight balustrade – Left side – KMFLIGHTL

    FLIGHT BALUSTRADE – LEFT SIDE – KMFLIGHTL

    Code: KMFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Flight Balustrade – Right Side – KMFLIGHTR

    FLIGHT BALUSTRADE – RIGHT SIDE – KMFLIGHTR

    Code: KMFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • 1 – 17 tread – Premium Stair Kit – KCPRKIT1

    1 – 17 TREAD – PREMIUM STAIR KIT – KCPRKIT1

    Code: KCPRKIT1

    Description

    These timber steps are available within our Premium Stair Kit range. This kit is easy to assemble, with all necessary parts included. Made using 290 x 45mm LOSP Pine (environmentally friendly timber) Stringers (sides)

    Includes:

    • Included 1 Step (tread) Height 330mm Distance from elevated platform 380mm.
    • Full kit 2 x stringers (sides) with housing joints Treads (steps) number as required.
    • Aluminium stair nosing attached with non-slip tape applied in black (tape interchangeable).
    • Galvanised 10mm booker (threaded) rod with flush cap nuts.
    • 2 x Galvanised angle brackets for each tread with 12 /12g x 30mm HEX HEAD.
    • Screws per tread Internal step width = 945mm.
    • Complete external width = 1035mm.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

Go to Top