Products - Page 6 of 38 - Karem Woodcraft

FLIGHT PANEL BALUSTRADE – KLFPANELR

Code: KLFPANELR

Description

These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
Required amount of Galvanised 5mm HEX drive Batten screws.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

FLIGHT PANEL BALUSTRADE – KMFPANELL

Code: KMFPANELL

Description

These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
Required amount of Galvanised 5mm HEX drive Batten screws.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

FLIGHT PANEL BALUSTRADE – KMFPANELR

Code: KMFPANELR

Description

These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
Required amount of Galvanised 5mm HEX drive Batten screws.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE NEWEL POST – KLFPOSTS1200

Code: KLFPOSTS1200

Description

These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using LOSP Pine (environmentally friendly timber).

Includes:

2 Coach bolts with nuts and washers provided per post.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE – LEFT SIDE – KLFLIGHTL

Code: KLFLIGHTL

Description

These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
88 x 88 x 1200mm newel posts.
Required amount of Galvanised 5mm HEX drive Batten screws.
2 Coach Bolts with nuts and washers per post.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE – RIGHT SIDE – KLFLIGHTR

Code: KLFLIGHTR

Description

These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
88 x 88 x 1200mm newel posts.
Required amount of Galvanised 5mm HEX drive Batten screws.
2 Coach Bolts with nuts and washers per post.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE – LEFT SIDE – KMFLIGHTL

Code: KMFLIGHTL

Description

These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
88 x 88 x 1200mm newel posts.
Required amount of Galvanised 5mm HEX drive Batten screws.
2 Coach Bolts with nuts and washers per post.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE – RIGHT SIDE – KMFLIGHTR

Code: KMFLIGHTR

Description

These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
88 x 88 x 1200mm newel posts.
Required amount of Galvanised 5mm HEX drive Batten screws.
2 Coach Bolts with nuts and washers per post.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

1 – 17 TREAD – PREMIUM STAIR KIT – KCPRKIT1

Code: KCPRKIT1

Description

These timber steps are available within our Premium Stair Kit range. This kit is easy to assemble, with all necessary parts included. Made using 290 x 45mm LOSP Pine (environmentally friendly timber) Stringers (sides)

Includes:

Included 1 Step (tread) Height 330mm Distance from elevated platform 380mm.
Full kit 2 x stringers (sides) with housing joints Treads (steps) number as required.
Aluminium stair nosing attached with non-slip tape applied in black (tape interchangeable).
Galvanised 10mm booker (threaded) rod with flush cap nuts.
2 x Galvanised angle brackets for each tread with 12 /12g x 30mm HEX HEAD.
Screws per tread Internal step width = 945mm.
Complete external width = 1035mm.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

1 – 17 TREAD PREMIUM PAIR STAIR STRINGERS WITH BATTON SCREWS – KMPRSTAIR1

Code: KMPRSTAIR1

Description

These Stringers are available within our Premium Stair range.

Includes:

This item includes pair of stringers.
Batten screws and DOES NOT INCLUDE the treads.
Made using 290 x 45mm MERBAU
1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 380mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
TREADS NOT INCLUDED.
ASSEMBLY INSTRUCTIONS INCLUDED.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KMPRSKIT. Custom made height rises also available.

MAKE AN ENQUIRY

Details

1-17 TREAD – PREMIUM PAIR STAIR STRINGERS WITH BATTON SCREWS – KLPRSTAIR1

Code: KLPRSTAIR1

Description

These Stringers are available within our Premium Stair range.

Includes:

This item includes pair of stringers.
Batten screws and DOES NOT INCLUDE the treads.
Made using 290 x 45mm LOSP pine (environmentally friendly timber).
1 x pair of 1 tread Stringers Included HEIGHT 330mm.
DISTANCE FROM ELEVATED PLATFORM 380mm
4 x Galvanised 5mm HEX drive Batten screws per tread included.
TREADS NOT INCLUDED.
ASSEMBLY INSTRUCTIONS INCLUDED.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KLPRSKIT Custom made height rises also available.

MAKE AN ENQUIRY

Details

COMPLETE DIY STAIR KIT – 240MM TREAD TO SUIT RESIDENTIAL USE

Code: KLSKIT

Description

The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 45mm LOSP TREATED PINE (Environmentally friendly timber).