Melbourne / VIC Pickup • Australia-Wide Delivery Available

Need Help? Call us on 03 9720 7266 | [email protected]

Need Help? Call us on 03 9720 7266 | [email protected]

  • Finlay Gate

    Finlay Gate

    Code: FINLAY

    Description

    We sell a range of period style heritage & decorative timber gates. All our gates are custom made in Australia to meet your specific size and style requirements. We use high quality timber that comes with an extensive warranty period.

    Application

    MADE TO ORDER - CALL FOR A QUOTE.

  • Flight Balustrade – Left side – KLFLIGHTL

    FLIGHT BALUSTRADE – LEFT SIDE – KLFLIGHTL

    Code: KLFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Flight balustrade – Left side – KMFLIGHTL

    FLIGHT BALUSTRADE – LEFT SIDE – KMFLIGHTL

    Code: KMFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Flight Balustrade – Right side – KLFLIGHTR

    FLIGHT BALUSTRADE – RIGHT SIDE – KLFLIGHTR

    Code: KLFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Flight Balustrade – Right Side – KMFLIGHTR

    FLIGHT BALUSTRADE – RIGHT SIDE – KMFLIGHTR

    Code: KMFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Placeholder

    FLIGHT BALUSTRADE NEWEL POST – KLFPOSTS1200

    Code: KLFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using LOSP Pine (environmentally friendly timber).

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
  • Placeholder

    FLIGHT BALUSTRADE NEWEL POST – KMFPOSTS1200

    Code: KMFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using MERBAU.

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KLFPANELL

    Code: KLFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KLFPANELR

    Code: KLFPANELR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KMFPANELL

    Code: KMFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KMFPANELR

    Code: KMFPANELR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Fretwork – FR4AMA

    FRETWORK – FR4AMA

    Code: FR4AMA

    Description

    Our FR4 Decorative Motifs are made using LOSP Treated Pine (environmentally friendly timber).

    Includes:

    • They are approximately 90mm x 19mm x 235mm long.
    • The cut-out is 68mm long and is in the centre of the upright.

    Application

    Custom sizes and species of timber available upon request.

  • Fretwork – FR4AMB

    FRETWORK – FR4AMB

    Code: FR4AMB

    Description

    Our FR4 Decorative Motifs are made using LOSP Treated Pine (environmentally friendly timber).

    Includes:

    • They are approximately 90mm x 19mm x 235mm long.
    • The cut-out is 80mm long and is in the centre of the upright.

    Application

    Custom sizes and species of timber available upon request.

  • Fretwork – FR4AMC

    FRETWORK – FR4AMC

    Code: FR4AMC

    Description

    Our FR4 Decorative Motifs are made using LOSP Treated Pine (environmentally friendly timber).

    Includes:

    • They are approximately 90mm x 19mm x 235mm long.
    • The cut-out is 75mm long and is in the centre of the upright.

    Application

    Custom sizes and species of timber available upon request.

  • Fretwork – FR4AMD

    FRETWORK – FR4AMD

    Code: FR4AMD

    Description

    Our FR4 Decorative Motifs are made using LOSP Treated Pine (environmentally friendly timber).

    Includes:

    • They are approximately 90mm x 19mm x 235mm long.
    • The cut-out is 75mm long and is in the centre of the upright.

    Application

    Custom sizes and species of timber available upon request.

  • Fretwork – FR4AME

    FRETWORK – FR4AME

    Code: FR4AMF

    Description

    Our FR4 Decorative Motifs are made using LOSP Treated Pine (environmentally friendly timber).

    Includes:

    • They are approximately 90mm x 19mm x 235mm long.
    • The cut-out is 70mm long and is in the centre of the upright.

    Application

    Custom sizes and species of timber available upon request.

  • Fretwork – FR4AMF

    FRETWORK – FR4AMF

    Code: FR4AMF

    Description

    Our FR4 Decorative Motifs are made using LOSP Treated Pine (environmentally friendly timber).

    Includes:

    • They are approximately 90mm x 19mm x 235mm long.
    • The cut-out is 70mm long and is in the centre of the upright.

    Application

    Custom sizes and species of timber available upon request.

  • Fretwork – FR4AMG

    FRETWORK – FR4AMG

    Code: FR4AMG

    Description

    Our FR4 Decorative Motifs are made using LOSP Treated Pine (environmentally friendly timber).

    Includes:

    • They are approximately 90mm x 19mm x 235mm long.
    • The cut-out is 78mm long and is in the centre of the upright.

    Application

    Custom sizes and species of timber available upon request.

  • Placeholder

    FRETWORK KIT – FR4AKITA-G

    Code: FR4AKITA-G

    Description

    Our FR4 Fretwork is available in kit form, cut to length for you to assemble on site. Approximate sizes of everything.

    Includes:

    • 42mm x 42mm Toprail (cut to length).
    • 42mm x 19mm x 235mm Vertical Uprights (6 per metre).
    • 90mm x 19mm x 235mm Decorative Motifs (2 per metre, available with any of our A-G range).
    • 42mm x 42mm Bottomrail (cut to length) &
    • 19mm x 12mm x 1m Fillet mould.
    We require the width between posts and each kit is cut to length.

    Application

    Custom sizes and species of timber available upon request.
  • Placeholder

    FRIEZE WORK – FRI5

    Code: FRI5

    Description

    Our FRI5 style Internal friezework is made using 18mm thick MDF with our 90mm x 42mm pine droppers to frame. We cut each individual piece to order. Please specify the overall width and outside height and we will make your piece to suit.

    Includes:

    • Available in pine for staining.
    • Also available as Window Pelmets.

    Application

    Custom sizes and species of timber available upon request. Please use email enquiry form for further discussion.

  • Frieze Work – SA10FW

    FRIEZE WORK – SA10FW

    Code: SA10FW

    Description

    Our A10 style Frieze works are made using 18mm thick MDF. We cut each individual piece to order. Nominate your width and height.

    Includes:

    • Finished with a 42mm x 42mm pine frame round all four sides.

    Application

    Other species of timber and custom sizes are available upon request.

  • Frieze Work – SA11FW

    FRIEZE WORK – SA11FW

    Code: SA11FW

    Description

    Our A11 style Frieze works are made using 18mm thick MDF. We cut each individual piece to order. Nominate your width and height.

    Includes:

    • Finished with a 42mm x 42mm pine frame round all four sides.

    Application

    Other species of timber and custom sizes are available upon request.

  • Frieze Work – SA12FW

    FRIEZE WORK – SA12FW

    Code: SA12FW

    Description

    Our A12 style Frieze works are made using 18mm thick MDF. We cut each individual piece to order. Nominate your width and height.

    Includes:

    • Finished with a 42mm x 42mm pine frame round all four sides.

    Application

    Other species of timber and custom sizes are available upon request.

  • Frieze Work – SA13FW

    FRIEZE WORK – SA13FW

    Code: SA13FW

    Description

    Our A13 style Frieze works are made using 18mm thick MDF. We cut each individual piece to order. Nominate your width and height.

    Includes:

    • Finished with a 42mm x 42mm pine frame round all four sides.

    Application

    Other species of timber and custom sizes are available upon request.

Go to Top