Call Us Today! 1300 547 581|info@karemwoodcraft.com.au
Loading...
  • Placeholder

    FLIGHT BALUSTRADE NEWEL POST – KLFPOSTS1200

    Code: KLFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using LOSP Pine (environmentally friendly timber).

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
    Details
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KMFPANELR

    Code: KMFPANELR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
    Details
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KMFPANELL

    Code: KMFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
    Details
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KLFPANELR

    Code: KLFPANELR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
    Details
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KLFPANELL

    Code: KLFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
    Details
  • Placeholder

    FLIGHT BALUSTRADE NEWEL POST – KMFPOSTS1200

    Code: KMFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using MERBAU.

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
    Details
  • 1-18 Tread pair domestic use stringers with Batten screws – KCSTAIR1

    1-18 TREAD PAIR DOMESTIC USE STRINGERS WITH BATTEN SCREWS – KCSTAIR1

    Code: KCSTAIR1

    Description

    These Stringers are available within our Domestic Stair range.

    Includes:

    • This item includes pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 240 x 45mm CCA PINE.
    • 1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 340mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • Treads Not included.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KCSKIT. Custom made height rises also available.

    Details
  • 1- 18 Tread Sawtooth Centre Support – KLSAW1

    1- 18 TREAD SAWTOOTH CENTRE SUPPORT – KLSAW1

    Code: KLSAW1

    Description

    The Sawtooth Centre Supports are available within our Domestic Stair range.Made using 240 x 45mm LOSP pine (environmentally friendly timber).

    Includes:

    • 1 x 1 Tread Sawtooth TO SUIT 240 GOING x 165mm
    • STEP RISE 2 x Galvanised 5mm HEX drive Batten screws per tread included.
    • Treads Not Included
    • Assembly Instructions included.
    These centre supports are not commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. The Sawtooth’s are the perfect support for any staircase that will be over 1200mm wide.Great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
  • 1- 18 Tread Sawtooth Centre Support – KCSAW1

    1- 18 TREAD SAWTOOTH CENTRE SUPPORT – KCSAW1

    Code: KCSAW1

    Description

    The Sawtooth Centre Supports are available within our Domestic Stair range. Made using 240 x 45mm CCA PINE.

    Includes:

    • 1 x 1 Tread Sawtooth TO SUIT 240 GOING x 165mm
    • STEP RISE 2 x Galvanised 5mm HEX drive Batten screws per tread included.
    • Treads Not Included
    • Assembly Instructions included.
    These centre supports are not commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. The Sawtooth’s are the perfect support for any staircase that will be over 1200mm wide.Great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
  • 1-18 Tread Sawtooth Centre Support – KMSAW1

    1-18 TREAD SAWTOOTH CENTRE SUPPORT – KMSAW1

    Code: KMSAW1

    Description

    The Sawtooth Centre Supports are available within our Domestic Stair range.

    Includes:

    • Made using 240 x 42mm MERBAU 1 x 1 Tread Sawtooth TO SUIT 240 GOING x 165mm
    • STEP RISE 2 x Galvanised 5mm HEX drive Batten screws per tread included.
    • Treads Not Included
    • Assembly Instructions included.
    These centre supports are not commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. The Sawtooth’s are the perfect support for any staircase that will be over 1200mm wide.Great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
  • 1 – 17 Tread Premium pair stair stringers with Batton Screws – KMPRSTAIR1

    1 – 17 TREAD PREMIUM PAIR STAIR STRINGERS WITH BATTON SCREWS – KMPRSTAIR1

    Code: KMPRSTAIR1

    Description

    These Stringers are available within our Premium Stair range.

    Includes:

    • This item includes pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 290 x 45mm MERBAU
    • 1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 380mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • TREADS NOT INCLUDED.
    • ASSEMBLY INSTRUCTIONS INCLUDED.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KMPRSKIT. Custom made height rises also available.

    Details
  • Complete DIY stair kit – KCSKIT

    COMPLETE DIY STAIR KIT – KCSKIT

    Code: KCSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 45mm CCA PINE.

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
Go to Top