Arched Timber Fretwork – FR1ASS

Code: FR1ASS

Our FR1 Fretwork is made using LOSP Treated pine.

Includes:

• Approximate sizes are: 90mm x 42mm Toprail.
• 42mm x 19mm Vertical Uprights.
• 90mm x 65mm Arched Bottomrail with 19mm quad as the dental work.

We require the width, outside overall height and the centre overall height and each arched panel is made to your specifications.

Application

Custom sizes and species of timber catered for upon request.

The FR1 is an arched verandah fretwork panel supplied assembled: a 90 x 42 mm top rail, 42 x 19 mm vertical uprights and a 90 x 65 mm arched bottom rail with 19 mm quad as the dental work, in LOSP treated pine. Fretwork is priced per lineal metre, so $607.67 is the rate for the span, not the finished price. For an arched panel we need three measurements: the width between the posts, the outside overall height and the centre overall height. Custom sizes and other timbers are cut on request. See the external fretwork range and its how-to-measure guide.

The FR1 is an arched panel with the heavier top rail: a 90 x 42 mm top rail over a 90 x 65 mm arched bottom rail, with 42 x 19 mm vertical uprights between and 19 mm quad run along the arch as the dental work. It is assembled in LOSP treated pine at $607.67 per lineal metre, the same rate as the FR9, which adds decorative motifs.

On the cost guide’s six-metre Federation frontage, FR1 comes to about $3,646 for the fretwork alone. Because the bottom rail follows your curve, send the width, the outside overall height and the centre overall height. The arched rail is also sold on its own as the FR1ARCHBR. See the fretwork cost guide.