Products - Page 11 of 13 - Karem Woodcraft

Code: F3970

Description

Gable Finials are available in our period product range. Made from LOSP treated pine (environmentally friendly timber).

Includes:

This finial is 900 long x 70 x 70mm.
Top turning = 425mm
Square section = 365mm.
Bottom turning = 110mm.

Perfect for use on Entry Lychgates, Cubby houses, Carports, House gable, etc.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

Code: F2970

Description

Gable Finials are available in our period product range. Made from LOSP treated pine (environmentally friendly timber).

Includes:

This finial is 900 long x 70 x 70mm.
Top turning = 325mm
Square section = 425mm.
Bottom turning = 150mm.

Perfect for use on Entry Lychgates, Cubby houses, Carports, House gable, etc.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

Code: F1970

Description

Gable Finials are available in our period product range. Made from LOSP treated pine (environmentally friendly timber).

Includes:

This finial is 900 long x 70 x 70mm.
Top turning = 250mm
Square section = 550mm.
Bottom turning = 100mm.

Perfect for use on Entry Lychgates, Cubby houses, Carports, House gable, etc.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

Code: GI7

Description

Our extensive range of gable infills are available to suit any sized gable as we make them all to order. Made using 9mm LOSP treated Marine ply.

Application

Other designs available upon request.

MAKE AN ENQUIRY

Details

Code: GI6

Description

Our extensive range of gable infills are available to suit any sized gable as we make them all to order. Made using 9mm LOSP treated Marine ply.

Application

Other designs available upon request.

MAKE AN ENQUIRY

Details

Code: GI5

Description

Our extensive range of gable infills are available to suit any sized gable as we make them all to order. Made using 9mm LOSP treated Marine ply.

Application

Other designs available upon request.

MAKE AN ENQUIRY

Details

Code: GI4

Description

Our extensive range of gable infills are available to suit any sized gable as we make them all to order. Made using 9mm LOSP treated Marine ply.

Application

Other designs available upon request.

MAKE AN ENQUIRY

Details

Code: GI3

Description

Our extensive range of gable infills are available to suit any sized gable as we make them all to order. Made using 9mm LOSP treated Marine ply.

Application

Other designs available upon request.

MAKE AN ENQUIRY

Details

Code: GI2

Description

Our extensive range of gable infills are available to suit any sized gable as we make them all to order. Made using 9mm LOSP treated Marine ply.

Application

Other designs available upon request.

MAKE AN ENQUIRY

Details

Code: GI1

Description

Our extensive range of gable infills are available to suit any sized gable as we make them all to order. Made using 9mm LOSP treated Marine ply.

Application

Other designs available upon request.

MAKE AN ENQUIRY

Details

Code: GVRND600

Description

Decorative Circle Vent. Made from LOSP Treated Pine with Flywire attached to the back to prevent any insect infiltration.

Includes:

Straps attached for easy installation
600mm diameter
Flush mount with a recess of 28mm
Slats are 20 x 9mm

Moulding will sit 17mm out from wall.

Application

Custom made shapes and sizes available upon request.

MAKE AN ENQUIRY

Details

Code: GVH6

Description

Decorative Circle Vent. Made from LOSP Treated Pine with Flywire attached to the back to prevent any insect infiltration.

Includes:

Straps attached for easy installation
450 x 510mm.
Flush mount with a recess of 28mm
Slats are 20 x 9mm.

Moulding will sit 17mm out from wall.

Application

Custom made shapes and sizes available upon request.

MAKE AN ENQUIRY

Details

Code: GVOCT

Description

Decorative Circle Vent. Made from LOSP Treated Pine with Flywire attached to the back to prevent any insect infiltration.

Includes:

Straps attached for easy installation
450 x 510mm.
Flush mount with a recess of 28mm
Slats are 20 x 9mm.

Moulding will sit 17mm out from wall.

Application

Custom made shapes and sizes available upon request.

MAKE AN ENQUIRY

Details

Code: GVSQ

Description

Decorative Circle Vent. Made from LOSP Treated Pine with Flywire attached to the back to prevent any insect infiltration.

Includes:

Straps attached for easy installation
450 x 510mm.
Flush mount with a recess of 28mm
Slats are 20 x 9mm.

Moulding will sit 17mm out from wall.

Application

Custom made shapes and sizes available upon request.

MAKE AN ENQUIRY

Details

Code: GVHR

Description

Decorative Circle Vent. Made from LOSP Treated Pine with Flywire attached to the back to prevent any insect infiltration.

Includes:

Straps attached for easy installation
720 x 420mm.
Flush mount with a recess of 28mm
Slats are 20 x 9mm.

Moulding will sit 17mm out from wall.

Application

Custom made shapes and sizes available upon request.

MAKE AN ENQUIRY

Details

Code: TIML

Description

Our timber fixed Louvers are perfect for keeping out the rain as well as direct sunlight whilst still admitting light and air. Made from LOSP Treated Pine - Which has 25 year guarantee against rot, fungal decay and insect attack (see our FAQs for more details on painting).

Includes:

Silver Top Ash: Complies with the BAL 29 fire rating -Cedar.

The illustration shows 1 way of using block louver panels above the door allowing for ventilations. The general use is for verandahs for privacy, air flows and shade.

STANDARD SIZE:

85mm by 17mm slats / 90mm by 42mm frame.
Supplied in a flat pack or manufactured as a full panel.

Application

Custom sizes available.

MAKE AN ENQUIRY

Details

WINDOW / DOOR SHUTTERS – WDSH

Code: WDSH

Description

Our timber Windows & Door Shutters are perfect for keeping out the rain as well as direct sunlight whilst still admitting light and air. Made from LOSP Treated Pine - Which has 25 year guarantee against rot, fungal decay and insect attack (see our FAQs for more details on painting).

Includes:

Silver Top Ash: Complies with the BAL 29 fire rating -Cedar

The illustration shows 1 way of using block louver panels above the door allowing for ventilations. The general use is for verandahs for privacy, air flows and shade.

Application

Matching service available custom sizes available

MAKE AN ENQUIRY

Details

COMPLETE DIY STAIR KIT – KMSKIT

Code: KMSKIT

Description

The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 42mm MERBAU.

Includes:

Stringers, Treads and sawtooth - when over 1200mm wide.
4 x Galvanised 5mm HEX drive Batten screws per tread.
Extra screws provided when sawtooths required.
Assembly Instructions included.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

COMPLETE DIY STAIR KIT – KMPRSKIT

Code: KMPRSKIT

Description

The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 290 x 42mm MERBAU.

Includes:

Stringers.
Treads and sawtooth - when over 1200mm wide.
4 x Galvanised 5mm HEX drive Batten screws per tread.
Extra screws provided when sawtooths required.
Assembly Instructions included.

These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

1-18 TREAD PAIR DOMESTIC USE STRINGERS WITH BATTEN SCREWS – KMSTAIR1

Code: KMSTAIR1

Description

These Stringers are available within our Domestic Stair range.

Includes:

This item includes pair of stringers.
Batten screws and DOES NOT INCLUDE the treads.
Made using 240 x 42mm MERBAU 1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 340mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
TREADS NOT INCLUDED.
Assembly Instructions included.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These stringers are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KMSKIT. Custom made height rises also available.

MAKE AN ENQUIRY

Details

1-18 TREAD PAIR DOMESTIC USE STRINGERS WITH BATTEN SCREWS

Code: KLSTAIR1

Description

These Stringers are available within our Domestic Stair range.

Includes:

Pair of stringers.
Batten screws and DOES NOT INCLUDE the treads.
Made using 240 x 45mm LOSP pine (environmentally friendly timber).
1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 340mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
TREADS NOT INCLUDED.
Assembly Instructions included.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These stringers are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KLSKIT. Custom made height rises also available.

MAKE AN ENQUIRY

Details

COMPLETE DIY STAIR KIT – 290MM TREAD TO SUIT COMMERCIAL AND RESIDENTIAL USE

Code: KLPRSKIT

Description

The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 290 x 45mm LOSP TREATED PINE (Environmentally friendly timber).

Includes:

Stringers.
Treads and sawtooth - when over 1200mm wide.
4 x Galvanised 5mm HEX drive Batten screws per tread.
Extra screws provided when sawtooths required.
Assembly Instructions included.

These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

COMPLETE DIY STAIR KIT – 240MM TREAD TO SUIT RESIDENTIAL USE

Code: KLSKIT

Description

The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 45mm LOSP TREATED PINE (Environmentally friendly timber).

Includes:

Stringers.
Treads and sawtooth - when over 1200mm wide.
4 x Galvanised 5mm HEX drive Batten screws per tread.
Extra screws provided when sawtooths required.
Assembly Instructions included.

These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

1-17 TREAD – PREMIUM PAIR STAIR STRINGERS WITH BATTON SCREWS – KLPRSTAIR1

Code: KLPRSTAIR1

Description

These Stringers are available within our Premium Stair range.

Includes:

This item includes pair of stringers.
Batten screws and DOES NOT INCLUDE the treads.
Made using 290 x 45mm LOSP pine (environmentally friendly timber).
1 x pair of 1 tread Stringers Included HEIGHT 330mm.
DISTANCE FROM ELEVATED PLATFORM 380mm
4 x Galvanised 5mm HEX drive Batten screws per tread included.
TREADS NOT INCLUDED.
ASSEMBLY INSTRUCTIONS INCLUDED.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KLPRSKIT Custom made height rises also available.

MAKE AN ENQUIRY

Details

1 – 17 TREAD PREMIUM PAIR STAIR STRINGERS WITH BATTON SCREWS – KMPRSTAIR1

Code: KMPRSTAIR1

Description

These Stringers are available within our Premium Stair range.

Includes:

This item includes pair of stringers.
Batten screws and DOES NOT INCLUDE the treads.
Made using 290 x 45mm MERBAU
1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 380mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
TREADS NOT INCLUDED.
ASSEMBLY INSTRUCTIONS INCLUDED.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KMPRSKIT. Custom made height rises also available.

MAKE AN ENQUIRY

Details

1 – 17 TREAD – PREMIUM STAIR KIT – KCPRKIT1

Code: KCPRKIT1

Description

These timber steps are available within our Premium Stair Kit range. This kit is easy to assemble, with all necessary parts included. Made using 290 x 45mm LOSP Pine (environmentally friendly timber) Stringers (sides)

Includes:

Included 1 Step (tread) Height 330mm Distance from elevated platform 380mm.
Full kit 2 x stringers (sides) with housing joints Treads (steps) number as required.
Aluminium stair nosing attached with non-slip tape applied in black (tape interchangeable).
Galvanised 10mm booker (threaded) rod with flush cap nuts.
2 x Galvanised angle brackets for each tread with 12 /12g x 30mm HEX HEAD.
Screws per tread Internal step width = 945mm.
Complete external width = 1035mm.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE – RIGHT SIDE – KMFLIGHTR

Code: KMFLIGHTR

Description

These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
88 x 88 x 1200mm newel posts.
Required amount of Galvanised 5mm HEX drive Batten screws.
2 Coach Bolts with nuts and washers per post.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE – LEFT SIDE – KMFLIGHTL

Code: KMFLIGHTL

Description

These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
88 x 88 x 1200mm newel posts.
Required amount of Galvanised 5mm HEX drive Batten screws.
2 Coach Bolts with nuts and washers per post.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE – RIGHT SIDE – KLFLIGHTR

Code: KLFLIGHTR

Description

These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
88 x 88 x 1200mm newel posts.
Required amount of Galvanised 5mm HEX drive Batten screws.
2 Coach Bolts with nuts and washers per post.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE – LEFT SIDE – KLFLIGHTL

Code: KLFLIGHTL

Description

These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
88 x 88 x 1200mm newel posts.
Required amount of Galvanised 5mm HEX drive Batten screws.
2 Coach Bolts with nuts and washers per post.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE NEWEL POST – KLFPOSTS1200

Code: KLFPOSTS1200

Description

These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using LOSP Pine (environmentally friendly timber).

Includes:

2 Coach bolts with nuts and washers provided per post.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

FLIGHT PANEL BALUSTRADE – KMFPANELR

Code: KMFPANELR

Description

These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
Required amount of Galvanised 5mm HEX drive Batten screws.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

FLIGHT PANEL BALUSTRADE – KMFPANELL

Code: KMFPANELL

Description

These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
Required amount of Galvanised 5mm HEX drive Batten screws.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

FLIGHT PANEL BALUSTRADE – KLFPANELR

Code: KLFPANELR

Description

These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
Required amount of Galvanised 5mm HEX drive Batten screws.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

FLIGHT PANEL BALUSTRADE – KLFPANELL

Code: KLFPANELL

Description

These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
Required amount of Galvanised 5mm HEX drive Batten screws.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE NEWEL POST – KMFPOSTS1200

Code: KMFPOSTS1200

Description

These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using MERBAU.

Includes:

2 Coach bolts with nuts and washers provided per post.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details