Call Us Today! 1300 547 581|info@karemwoodcraft.com.au
  • Balustrading – BS585FLASS

    BALUSTRADING – BS585FLASS

    Code: BS585FLASS

    Description

    Our BS5 style flight balustrading comes in fully assembled panels, ready to be installed on site. Made using LOSP Treated Pine (environmentally friendly timber).

    Includes:

    • HR2 Handrail (85mm x 65mm)
    • BR2 Bottomrail (65mm x 42mm)
    • Turned Uprights (6 per metre, 1m x 42mm x 42mm)
    • Fillet (19mm x 12mm x 1m)
    To fill gaps in trench between uprights.

    Application

    A beautiful way to enhance stair safety. Made to order. Custom sizes and species of timber available upon request.

    Details
  • Balustrading – BS585KIT

    BALUSTRADING – BS585KIT

    Code: BS585KIT

    Description

    Our BS5 style balustrading comes in kit form to be assembled on site. Made using LOSP Treated Pine (environmentally friendly timber) Cut to order and:

    Includes:

    • HR2 Handrail (85mm x 65mm)
    • BR2 Bottomrail (65mm x 42mm)
    • Turned Uprights (6 per metre, 1m x 42mm x 42mm)
    • Fillet (43mm x 12mm x 1m)
    To fill gaps in trench between uprights.

    Application

    Custom sizes and species of timber available upon request.

    Details
  • Balustrading – BS665ASS

    BALUSTRADING – BS665ASS

    Code: BS665ASS

    Description

    Our BS6 style balustrading comes in fully assembled panels ready to be installed on site. Made using LOSP Treated Pine (environmentally friendly timber)

    Includes:

    • HR1 Handrail (65mm x 43mm)
    • BR2 Bottomrail (65mm x 42mm)
    • Square Uprights (6 per metre, 1m x 42mm x 42mm) &
    • Fillet (43mm x 12mm x 1m)
    To fill gaps in trench between uprights.

    Application

    Made to order. Custom sizes and species of timber available upon request.

    Details
  • Balustrading – BS665FLASS

    BALUSTRADING – BS665FLASS

    Code: BS665FLASS

    Description

    Our BS6 style flight balustrading comes in fully assembled panels, ready to be installed on site. Made using LOSP Treated Pine (environmentally friendly timber)

    Includes:

    • HR1 Handrail (65mm x 43mm)
    • BR2 Bottomrail (65mm x 42mm)
    • Square Uprights (6 per metre, 1m x 42mm x 42mm) &
    • Fillet (43mm x 12mm x 1m)
    To fill gaps in trench between uprights.

    Application

    A beautiful way to enhance stair safety. Made to order. Custom sizes and species of timber available upon request.

    Details
  • Balustrading – BS665KIT

    BALUSTRADING – BS665KIT

    Code: BS665KIT

    Description

    Our BS6 style balustrading comes in kit form to be assembled on site. Made using LOSP Treated Pine (environmentally friendly timber) Cut to order and:

    Includes:

    • HR1 Handrail (65mm x 43mm)
    • BR2 Bottomrail (65mm x 42mm)
    • Square Uprights (6 per metre, 1m x 42mm x 42mm)
    • Fillet (43mm x 12mm x 1m)
    To fill gaps in trench between uprights.

    Application

    Custom sizes and species of timber available upon request.

    Details
  • Balustrading – BS685ASS

    BALUSTRADING – BS685ASS

    Code: BS685ASS

    Description

    Our BS6 style balustrading comes in fully assembled panels ready to be installed on site. Made using LOSP Treated Pine (environmentally friendly timber).

    Includes:

    • HR2 Handrail (85mm x 65mm)
    • BR2 Bottomrail (65mm x 42mm)
    • Square Uprights (6 per metre, 1m x 42mm x 19mm) &
    • Fillet (19mm x 12mm x 1m)
    To fill gaps in trench between uprights.

    Application

    Made to order. Custom sizes and species of timber available upon request.

    Details

  • BALUSTRADING – BS685FLASS

    Code: BS685FLASS

    Description

    Our BS6 style flight balustrading comes in fully assembled panels, ready to be installed on site. Made using LOSP Treated Pine (environmentally friendly timber).

    Includes:

    • HR2 Handrail (85mm x 65mm)
    • BR2 Bottomrail (65mm x 42mm)
    • Square Uprights (6 per metre, 1m x 42mm x 19mm)
    • Fillet (19mm x 12mm x 1m)
    To fill gaps in trench between uprights.

    Application

    A beautiful way to enhance stair safety. Made to order. Custom sizes and species of timber available upon request.

    Details
  • Placeholder

    BALUSTRADING – BS685KIT

    Code: FIL43A

    Description

    Our Fillet Mould is designed to fill the gaps in the trench where the balusters sit. It’s a tight fit to ensure no water can infiltrate any gaps. Made using LOSP treated pine (Environmentally friendly timber).

    Includes:

    • 43mm x 12mm x 1m lengths.

    Application

    Custom sizes and species of timber available upon request.

    Details
  • Placeholder

    BALUSTRADING – FIL19A

    Code: FIL19A

    Description

    Our Fillet Mould is designed to fill the gaps in the trench where the balusters sit. It’s a tight fit to ensure no water can infiltrate any gaps. Made using LOSP treated pine (Environmentally friendly timber).

    Includes:

    • 19mm x 12mm x 1m lengths.

    Application

    Custom sizes and species of timber available upon request.

    Details
  • Placeholder

    BALUSTRADING – FIL43A

    Code: FIL43A

    Description

    Our Fillet Mould is designed to fill the gaps in the trench where the balusters sit. It’s a tight fit to ensure no water can infiltrate any gaps. Made using LOSP treated pine (Environmentally friendly timber).

    Includes:

    • 43mm x 12mm x 1m lengths.

    Application

    Custom sizes and species of timber available upon request.

    Details
  • Balustrading – HR1ASL

    BALUSTRADING – HR1ASL

    Code: HR1ASL

    Description

    Our HR1 style handrail is the smaller option in our range. Made using Finger jointed LOSP Treated Pine (Environmentally friendly timber).

    Includes:

    • 65mm wide x 45mm high
    • with a 12mm deep trench in the bottom
    To suit either 19mm or 42mm sized inserts.

    Application

    Custom sizes and species of timber available upon request.

    Details
  • Balustrading – HR2ASL

    BALUSTRADING – HR2ASL

    Code: HR2ASL

    Description

    Our HR2 style handrail is the larger option in our range. Made using Finger jointed LOSP Treated Pine (Environmentally friendly timber).

    Includes:

    • 85mm wide x 65mm high
    • With a 12mm deep trench in the bottom
    To suit either 19mm or 42mm sized inserts.

    Application

    Custom sizes and species of timber available upon request.

    Details
  • Balustrading – SBA

    BALUSTRADING – SBA

    Code: SBA

    Description

    Our slat baluster uprights are made using 19mm x 42mm x 1m LOSP Treated Pine (environmentally friendly timber).

    Application

    Custom sizes and species of timber available upon request.

    Details
  • Placeholder

    BALUSTRADING – SQBA

    Code: SQBA

    Description

    Our Square Dressed all round balusters are made using 42mm x 42mm LOSP treated pine (environmentally friendly timber) and come in 1m lengths.

    Application

    Custom sizes and species of timber available upon request.

    Details
  • Placeholder

    BALUSTRADING – TB4

    Code: TB4

    Description

    Our Turned balusters are made using 42mm x 42mm LOSP treated pine (environmentally friendly timber) and come in 1m lengths.

    Includes:

    • The turning is 620mm long and
    • Starts 145mm down from the top of the baluster.

    Application

    Custom sizes and species of timber available upon request.

    Details
  • Placeholder

    BALUSTRADING – TB5

    Code: TB5

    Description

    Our Turned balusters are made using 42mm x 42mm LOSP treated pine (environmentally friendly timber) and come in 1m lengths.

    Includes:

    • The turning is 620mm long and
    • Starts 145mm down from the top of the baluster.

    Application

    Custom sizes and species of timber available upon request.

    Details
  • Base Mould – BM

    BASE MOULD – BM

    Code: BM

    Description

    Our Base Mould is a great touch to any post or for use as skirt anywhere. Made using LOSP Treated Pine (environmentally friendly timber).

    Includes:

    • It is 28mm Thick.
    • Bottom flat section is 163mm high
    • With moulded section 67mm = 230mm overall height.
    • Any length you require - up to 5.4m long.

    Application

    Other species of timber sizes and styles available upon request.

    Details
  • Bullnose Rafter – BULLNOSE

    BULLNOSE RAFTER – BULLNOSE

    Code: BULLNOSE

    Description

    Our Period Style Bullnose Verandah Rafters are made using LOSP Treated Pine (environmentally friendly timber) and are available to suit any size required.

    Includes:

    • Standard sizes are from 90mm x 42mm, 120mm x 42mm & 140mm x 42mm.
    • Any length & any radius of curve to suit roll of roofing.
    • Other species & sizes available upon request.
    • When renovating replacement of rotted rafters or brackets can be reproduced to maintain the originality of your home.
    • Adding a roof to your home will reduce your electricity bills for good.
    • Bullnose verandahs provide very effective insulation - The curve of a bullnose verandah cuts off direct sunlight and weather into your rooms.

    As a result, rooms behind a bullnose verandah remain surprisingly cool - even on notoriously hot Australian summer days.

    Application

    Hip and Valleys also available.

    Details
  • Complete DIY stair kit – 240mm tread to suit residential use

    COMPLETE DIY STAIR KIT – 240MM TREAD TO SUIT RESIDENTIAL USE

    Code: KLSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 45mm LOSP TREATED PINE (Environmentally friendly timber).

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
  • Complete DIY stair kit – 290mm tread to suit commercial and residential use

    COMPLETE DIY STAIR KIT – 290MM TREAD TO SUIT COMMERCIAL AND RESIDENTIAL USE

    Code: KLPRSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 290 x 45mm LOSP TREATED PINE (Environmentally friendly timber).

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
  • Complete DIY stair kit – KCSKIT

    COMPLETE DIY STAIR KIT – KCSKIT

    Code: KCSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 45mm CCA PINE.

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
  • Complete DIY stair kit – KMPRSKIT

    COMPLETE DIY STAIR KIT – KMPRSKIT

    Code: KMPRSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 290 x 42mm MERBAU.

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
  • Complete DIY Stair Kit – KMSKIT

    COMPLETE DIY STAIR KIT – KMSKIT

    Code: KMSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 42mm MERBAU.

    Includes:

    • Stringers, Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

    Details
  • Concave Rafter – CONCAVE

    CONCAVE RAFTER – CONCAVE

    Code: CONCAVE

    Description

    Our Period Style Concave Verandah Rafters are made using LOSP Treated Pine (environmentally friendly timber) and are available to suit any size required.

    Includes:

    • Standard sizes are from 90mm x 42mm, 120mm x 42mm & 140mm x 42mm.
    • Any length & any radius of curve to suit roll of roofing.
    • Other species & sizes available upon request.
    • When renovating replacement of rotted rafters or brackets can be reproduced to maintain the originality of your home.
    • Adding a roof to your home will reduce your electricity bills for good.
    • Concave verandahs provide very effective insulation - The curve of a Concave verandah cuts off direct sunlight and weather into your rooms.

    As a result, rooms behind a Concave verandah remain surprisingly cool - even on notoriously hot Australian summer days.

    Application

    Hip and Valleys also available.

    Details
  • Convex Rafter – CONVEX

    CONVEX RAFTER – CONVEX

    Code: CONVEX

    Description

    Our Period Style Convex Verandah Rafters are made using LOSP Treated Pine (environmentally friendly timber) and are available to suit any size required.

    Includes:

    • Standard sizes are from 90mm x 42mm, 120mm x 42mm & 140mm x 42mm.
    • Any length & any radius of curve to suit roll of roofing.
    • Other species & sizes available upon request.
    • When renovating replacement of rotted rafters or brackets can be reproduced to maintain the originality of your home.
    • Adding a roof to your home will reduce your electricity bills for good.
    • Convex verandahs provide very effective insulation - The curve of a Convex verandah cuts off direct sunlight and weather into your rooms.

    As a result, rooms behind a Convex verandah remain surprisingly cool - even on notoriously hot Australian summer days.

    Application

    Hip and Valleys also available.

    Details
  • Flight Balustrade – Left side – KLFLIGHTL

    FLIGHT BALUSTRADE – LEFT SIDE – KLFLIGHTL

    Code: KLFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
    Details
  • Flight balustrade – Left side – KMFLIGHTL

    FLIGHT BALUSTRADE – LEFT SIDE – KMFLIGHTL

    Code: KMFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
    Details
  • Flight Balustrade – Right side – KLFLIGHTR

    FLIGHT BALUSTRADE – RIGHT SIDE – KLFLIGHTR

    Code: KLFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
    Details
  • Flight Balustrade – Right Side – KMFLIGHTR

    FLIGHT BALUSTRADE – RIGHT SIDE – KMFLIGHTR

    Code: KMFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
    Details
  • Placeholder

    FLIGHT BALUSTRADE NEWEL POST – KLFPOSTS1200

    Code: KLFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using LOSP Pine (environmentally friendly timber).

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
    Details
  • Placeholder

    FLIGHT BALUSTRADE NEWEL POST – KMFPOSTS1200

    Code: KMFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using MERBAU.

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
    Details
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KLFPANELL

    Code: KLFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
    Details
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KLFPANELR

    Code: KLFPANELR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
    Details
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KMFPANELL

    Code: KMFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
    Details
  • Placeholder

    FLIGHT PANEL BALUSTRADE – KMFPANELR

    Code: KMFPANELR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
    Details
  • Fretwork – FR10ASS

    FRETWORK – FR10ASS

    Code: FR10ASS

    Description

    Our FR10 Fretwork is made using LOSP Treated pine.

    Includes:

    • Approximate sizes are: 90mm x 42mm Toprail.
    • 42mm x 19mm (55mm at widest part of squiggle).
    • Squiggle Verticle Uprights: 90mm x 19mm.
    • Decorative Motif (as shown in pic or available in any of our A-G range).
    • 90mm x 65mm Arched Bottomrail with 19mm quad as the dental work.

    We require the width, outside overall height and the centre overall height and each arched panel is made to your specifications

    Application

    Custom sizes and species of timber catered for upon request.

    Details
Go to Top