porch Archives - Karem Woodcraft

Code: N5B

Description

Our turned newel posts are a great way to support balustrading and end off a railing. With handrail block turned in to suit any handrail mould.

Your Measurements Not Listed? Please fill out the form below.

MAKE AN ENQUIRY

Details

Code: N4B

Description

Our turned newel posts are a great way to support balustrading and end off a railing. With handrail block turned in to suit any handrail mould.

Your Measurements Not Listed? Please fill out the form below.

MAKE AN ENQUIRY

Details

Code: N5A

Description

Our turned newel posts are a great way to support balustrading and end off a railing. With handrail block turned in to suit any handrail mould.

Your Measurements Not Listed? Please fill out the form below.

MAKE AN ENQUIRY

Details

Code: N4A

Description

Our turned newel posts are a great way to support balustrading and end off a railing. With handrail block turned in to suit any handrail mould.

Your Measurements Not Listed? Please fill out the form below.

MAKE AN ENQUIRY

Details

Code: V1

Description

Transform your home with our V1 turned post. Our Turned Posts are great for use on Verandahs, Porches, Carports or Gazebo's.

Your Measurements Not Listed? Please fill out the form below.

MAKE AN ENQUIRY

Details

Code: V2

Description

Transform your home with our V2 turned post. Our Turned Posts are great for use on Verandahs, Porches, Carports or Gazebo's.

Your Measurements Not Listed? Please fill out the form below.

MAKE AN ENQUIRY

Details

Code: V3

Description

Transform your home with our V3 turned post. Our Turned Posts are great for use on Verandahs, Porches, Carports or Gazebo's.

Your Measurements Not Listed? Please fill out the form below.

MAKE AN ENQUIRY

Details

Code: V4

Description

Transform your home with our V4 turned post. Our Turned Posts are great for use on Verandahs, Porches, Carports or Gazebo's.

Your Measurements Not Listed? Please fill out the form below.

MAKE AN ENQUIRY

Details

Code: V5

Description

Transform your home with our V5 turned post. Our Turned Posts are great for use on Verandahs, Porches, Carports or Gazebo's.

Your Measurements Not Listed? Please fill out the form below.

MAKE AN ENQUIRY

Details

Code: V6

Description

Transform your home with our V6 turned post. Our Turned Posts are great for use on Verandahs, Porches, Carports or Gazebo's.

Your Measurements Not Listed? Please fill out the form below.

MAKE AN ENQUIRY

Details

Code: V7

Description

Transform your home with our V7 turned post. Our Turned Posts are great for use on Verandahs, Porches, Carports or Gazebo's.

Please scroll through the pictures to decide if you require your post fluted or to have a handrail attachment.

Your Measurements Not Listed? Please fill out the form below.

MAKE AN ENQUIRY

Details

1-18 TREAD SAWTOOTH CENTRE SUPPORT – KMSAW1

Code: KMSAW1

Description

The Sawtooth Centre Supports are available within our Domestic Stair range.

Includes:

Made using 240 x 42mm MERBAU 1 x 1 Tread Sawtooth TO SUIT 240 GOING x 165mm
STEP RISE 2 x Galvanised 5mm HEX drive Batten screws per tread included.
Treads Not Included
Assembly Instructions included.

These centre supports are not commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. The Sawtooth’s are the perfect support for any staircase that will be over 1200mm wide.Great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

1- 18 TREAD SAWTOOTH CENTRE SUPPORT – KCSAW1

Code: KCSAW1

Description

The Sawtooth Centre Supports are available within our Domestic Stair range. Made using 240 x 45mm CCA PINE.

Includes:

1 x 1 Tread Sawtooth TO SUIT 240 GOING x 165mm
STEP RISE 2 x Galvanised 5mm HEX drive Batten screws per tread included.
Treads Not Included
Assembly Instructions included.

These centre supports are not commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. The Sawtooth’s are the perfect support for any staircase that will be over 1200mm wide.Great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

1- 18 TREAD SAWTOOTH CENTRE SUPPORT – KLSAW1

Code: KLSAW1

Description

The Sawtooth Centre Supports are available within our Domestic Stair range.Made using 240 x 45mm LOSP pine (environmentally friendly timber).

Includes:

1 x 1 Tread Sawtooth TO SUIT 240 GOING x 165mm
STEP RISE 2 x Galvanised 5mm HEX drive Batten screws per tread included.
Treads Not Included
Assembly Instructions included.

These centre supports are not commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. The Sawtooth’s are the perfect support for any staircase that will be over 1200mm wide.Great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

1-18 TREAD PAIR DOMESTIC USE STRINGERS WITH BATTEN SCREWS – KCSTAIR1

Code: KCSTAIR1

Description

These Stringers are available within our Domestic Stair range.

Includes:

This item includes pair of stringers.
Batten screws and DOES NOT INCLUDE the treads.
Made using 240 x 45mm CCA PINE.
1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 340mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
Treads Not included.
Assembly Instructions included.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KCSKIT. Custom made height rises also available.

MAKE AN ENQUIRY

Details

COMPLETE DIY STAIR KIT – KCSKIT

Code: KCSKIT

Description

The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 45mm CCA PINE.

Includes:

Stringers.
Treads and sawtooth - when over 1200mm wide.
4 x Galvanised 5mm HEX drive Batten screws per tread.
Extra screws provided when sawtooths required.
Assembly Instructions included.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE NEWEL POST – KMFPOSTS1200

Code: KMFPOSTS1200

Description

These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using MERBAU.

Includes:

2 Coach bolts with nuts and washers provided per post.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

FLIGHT PANEL BALUSTRADE – KLFPANELL

Code: KLFPANELL

Description

These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
Required amount of Galvanised 5mm HEX drive Batten screws.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

FLIGHT PANEL BALUSTRADE – KLFPANELR

Code: KLFPANELR

Description

These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
Required amount of Galvanised 5mm HEX drive Batten screws.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

FLIGHT PANEL BALUSTRADE – KMFPANELL

Code: KMFPANELL

Description

These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
Required amount of Galvanised 5mm HEX drive Batten screws.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

FLIGHT PANEL BALUSTRADE – KMFPANELR

Code: KMFPANELR

Description

These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
Required amount of Galvanised 5mm HEX drive Batten screws.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE NEWEL POST – KLFPOSTS1200

Code: KLFPOSTS1200

Description

These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using LOSP Pine (environmentally friendly timber).

Includes:

2 Coach bolts with nuts and washers provided per post.

Application

Custom sizes catered for.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE – LEFT SIDE – KLFLIGHTL

Code: KLFLIGHTL

Description

These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
88 x 88 x 1200mm newel posts.
Required amount of Galvanised 5mm HEX drive Batten screws.
2 Coach Bolts with nuts and washers per post.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE – RIGHT SIDE – KLFLIGHTR

Code: KLFLIGHTR

Description

These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
88 x 88 x 1200mm newel posts.
Required amount of Galvanised 5mm HEX drive Batten screws.
2 Coach Bolts with nuts and washers per post.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE – LEFT SIDE – KMFLIGHTL

Code: KMFLIGHTL

Description

These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
88 x 88 x 1200mm newel posts.
Required amount of Galvanised 5mm HEX drive Batten screws.
2 Coach Bolts with nuts and washers per post.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

FLIGHT BALUSTRADE – RIGHT SIDE – KMFLIGHTR

Code: KMFLIGHTR

Description

These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

Includes:

Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
88 x 88 x 1200mm newel posts.
Required amount of Galvanised 5mm HEX drive Batten screws.
2 Coach Bolts with nuts and washers per post.
DIY Instructions.

Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

1 – 17 TREAD – PREMIUM STAIR KIT – KCPRKIT1

Code: KCPRKIT1

Description

These timber steps are available within our Premium Stair Kit range. This kit is easy to assemble, with all necessary parts included. Made using 290 x 45mm LOSP Pine (environmentally friendly timber) Stringers (sides)

Includes:

Included 1 Step (tread) Height 330mm Distance from elevated platform 380mm.
Full kit 2 x stringers (sides) with housing joints Treads (steps) number as required.
Aluminium stair nosing attached with non-slip tape applied in black (tape interchangeable).
Galvanised 10mm booker (threaded) rod with flush cap nuts.
2 x Galvanised angle brackets for each tread with 12 /12g x 30mm HEX HEAD.
Screws per tread Internal step width = 945mm.
Complete external width = 1035mm.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

1 – 17 TREAD PREMIUM PAIR STAIR STRINGERS WITH BATTON SCREWS – KMPRSTAIR1

Code: KMPRSTAIR1

Description

These Stringers are available within our Premium Stair range.

Includes:

This item includes pair of stringers.
Batten screws and DOES NOT INCLUDE the treads.
Made using 290 x 45mm MERBAU
1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 380mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
TREADS NOT INCLUDED.
ASSEMBLY INSTRUCTIONS INCLUDED.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KMPRSKIT. Custom made height rises also available.

MAKE AN ENQUIRY

Details

1-17 TREAD – PREMIUM PAIR STAIR STRINGERS WITH BATTON SCREWS – KLPRSTAIR1

Code: KLPRSTAIR1

Description

These Stringers are available within our Premium Stair range.

Includes:

This item includes pair of stringers.
Batten screws and DOES NOT INCLUDE the treads.
Made using 290 x 45mm LOSP pine (environmentally friendly timber).
1 x pair of 1 tread Stringers Included HEIGHT 330mm.
DISTANCE FROM ELEVATED PLATFORM 380mm
4 x Galvanised 5mm HEX drive Batten screws per tread included.
TREADS NOT INCLUDED.
ASSEMBLY INSTRUCTIONS INCLUDED.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KLPRSKIT Custom made height rises also available.

MAKE AN ENQUIRY

Details

COMPLETE DIY STAIR KIT – 240MM TREAD TO SUIT RESIDENTIAL USE

Code: KLSKIT

Description

The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 45mm LOSP TREATED PINE (Environmentally friendly timber).

Includes:

Stringers.
Treads and sawtooth - when over 1200mm wide.
4 x Galvanised 5mm HEX drive Batten screws per tread.
Extra screws provided when sawtooths required.
Assembly Instructions included.

These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

COMPLETE DIY STAIR KIT – 290MM TREAD TO SUIT COMMERCIAL AND RESIDENTIAL USE

Code: KLPRSKIT

Description

The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 290 x 45mm LOSP TREATED PINE (Environmentally friendly timber).

Includes:

Stringers.
Treads and sawtooth - when over 1200mm wide.
4 x Galvanised 5mm HEX drive Batten screws per tread.
Extra screws provided when sawtooths required.
Assembly Instructions included.

These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

1-18 TREAD PAIR DOMESTIC USE STRINGERS WITH BATTEN SCREWS

Code: KLSTAIR1

Description

These Stringers are available within our Domestic Stair range.

Includes:

Pair of stringers.
Batten screws and DOES NOT INCLUDE the treads.
Made using 240 x 45mm LOSP pine (environmentally friendly timber).
1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 340mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
TREADS NOT INCLUDED.
Assembly Instructions included.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These stringers are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KLSKIT. Custom made height rises also available.

MAKE AN ENQUIRY

Details

1-18 TREAD PAIR DOMESTIC USE STRINGERS WITH BATTEN SCREWS – KMSTAIR1

Code: KMSTAIR1

Description

These Stringers are available within our Domestic Stair range.

Includes:

This item includes pair of stringers.
Batten screws and DOES NOT INCLUDE the treads.
Made using 240 x 42mm MERBAU 1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 340mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
TREADS NOT INCLUDED.
Assembly Instructions included.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These stringers are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KMSKIT. Custom made height rises also available.

MAKE AN ENQUIRY

Details

COMPLETE DIY STAIR KIT – KMPRSKIT

Code: KMPRSKIT

Description

The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 290 x 42mm MERBAU.

Includes:

Stringers.
Treads and sawtooth - when over 1200mm wide.
4 x Galvanised 5mm HEX drive Batten screws per tread.
Extra screws provided when sawtooths required.
Assembly Instructions included.

These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

Such As:

Front or rear entrance to homes.
On timber decking’s or within any undulating landscape.

Application

Custom made height rises also available.

MAKE AN ENQUIRY

Details

COMPLETE DIY STAIR KIT – KMSKIT

Code: KMSKIT

Description

The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 42mm MERBAU.

Includes:

Stringers, Treads and sawtooth - when over 1200mm wide.
4 x Galvanised 5mm HEX drive Batten screws per tread.
Extra screws provided when sawtooths required.
Assembly Instructions included.

These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.