Loading...
  • Code: KCSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 45mm CCA PINE.

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • Code: KMPRSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 290 x 42mm MERBAU.

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are commercial grade and are Building Codes Australia (BCA) compliant. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • Code: KMSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 42mm MERBAU.

    Includes:

    • Stringers, Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • Code: KLFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Code: KMFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Code: KLFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Code: KMFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Code: KLFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using LOSP Pine (environmentally friendly timber).

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
  • Code: KMFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using MERBAU.

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
  • Code: KLFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Code: KLFPANELR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Code: KMFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
Go to Top