• Code: VENEER

    Description

    We sell a range of period style heritage & decorative timber gates. All our gates are custom made in Australia to meet your specific size and style requirements. We use high quality timber that comes with an extensive warranty period.

    Application

    MADE TO ORDER - CALL FOR A QUOTE.

  • Code: CANTEBURY

    Description

    We sell a range of period style heritage & decorative timber gates. All our gates are custom made in Australia to meet your specific size and style requirements. We use high quality timber that comes with an extensive warranty period.

    Application

    MADE TO ORDER - CALL FOR A QUOTE.

  • Code: HAWTHORNE

    Description

    We sell a range of period style heritage & decorative timber gates. All our gates are custom made in Australia to meet your specific size and style requirements. We use high quality timber that comes with an extensive warranty period.

    Application

    MADE TO ORDER - CALL FOR A QUOTE.

  • Code: KENSINGTON

    Description

    We sell a range of period style heritage & decorative timber gates. All our gates are custom made in Australia to meet your specific size and style requirements. We use high quality timber that comes with an extensive warranty period.

    Application

    MADE TO ORDER - CALL FOR A QUOTE.

  • Code: KMSAW1

    Description

    The Sawtooth Centre Supports are available within our Domestic Stair range.

    Includes:

    • Made using 240 x 42mm MERBAU 1 x 1 Tread Sawtooth TO SUIT 240 GOING x 165mm
    • STEP RISE 2 x Galvanised 5mm HEX drive Batten screws per tread included.
    • Treads Not Included
    • Assembly Instructions included.
    These centre supports are not commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. The Sawtooth’s are the perfect support for any staircase that will be over 1200mm wide.Great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • Code: KCSAW1

    Description

    The Sawtooth Centre Supports are available within our Domestic Stair range. Made using 240 x 45mm CCA PINE.

    Includes:

    • 1 x 1 Tread Sawtooth TO SUIT 240 GOING x 165mm
    • STEP RISE 2 x Galvanised 5mm HEX drive Batten screws per tread included.
    • Treads Not Included
    • Assembly Instructions included.
    These centre supports are not commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. The Sawtooth’s are the perfect support for any staircase that will be over 1200mm wide.Great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • Code: KLSAW1

    Description

    The Sawtooth Centre Supports are available within our Domestic Stair range.Made using 240 x 45mm LOSP pine (environmentally friendly timber).

    Includes:

    • 1 x 1 Tread Sawtooth TO SUIT 240 GOING x 165mm
    • STEP RISE 2 x Galvanised 5mm HEX drive Batten screws per tread included.
    • Treads Not Included
    • Assembly Instructions included.
    These centre supports are not commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. The Sawtooth’s are the perfect support for any staircase that will be over 1200mm wide.Great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • Code: SB1WP

    Description

    Our B1 style Window Pelmets are made using 18mm thick MDF. We cut each individual piece to your specifications. Nominate the width of your window from outside of frame to outside of frame.

    Includes:

    • Standard sizes are 400mm high.
    • Finished with a pine top plate.

    Application

    Other species of timber and custom sizes are available upon request.

  • Code: AL1160

    Description

    Our Non-slip, Aluminium Nosing for stair treads is Building Codes of Australia Complient. It is an easy way to add safety to any stairs. Made using Aluminium with self adhesive non-slip tape in yellow and black.

    Includes:

    • Approx 70mm top face.
    • Hangs 10mm down front of tread.
  • Code: KCSTAIR1

    Description

    These Stringers are available within our Domestic Stair range.

    Includes:

    • This item includes pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 240 x 45mm CCA PINE.
    • 1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 340mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • Treads Not included.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KCSKIT. Custom made height rises also available.

  • Code: KCSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 45mm CCA PINE.

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • Code: KMFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using MERBAU.

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
  • Code: KLFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Code: KLFPANELR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Code: KMFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Code: KMFPANELR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Code: KLFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using LOSP Pine (environmentally friendly timber).

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
  • Code: KLFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Code: KLFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Code: KMFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Code: KMFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Code: KCPRKIT1

    Description

    These timber steps are available within our Premium Stair Kit range. This kit is easy to assemble, with all necessary parts included. Made using 290 x 45mm LOSP Pine (environmentally friendly timber) Stringers (sides)

    Includes:

    • Included 1 Step (tread) Height 330mm Distance from elevated platform 380mm.
    • Full kit 2 x stringers (sides) with housing joints Treads (steps) number as required.
    • Aluminium stair nosing attached with non-slip tape applied in black (tape interchangeable).
    • Galvanised 10mm booker (threaded) rod with flush cap nuts.
    • 2 x Galvanised angle brackets for each tread with 12 /12g x 30mm HEX HEAD.
    • Screws per tread Internal step width = 945mm.
    • Complete external width = 1035mm.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • Code: KMPRSTAIR1

    Description

    These Stringers are available within our Premium Stair range.

    Includes:

    • This item includes pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 290 x 45mm MERBAU
    • 1 x pair of 1 tread Stringers Included HEIGHT 330mm DISTANCE FROM ELEVATED PLATFORM 380mm 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • TREADS NOT INCLUDED.
    • ASSEMBLY INSTRUCTIONS INCLUDED.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KMPRSKIT. Custom made height rises also available.

  • Code: KLPRSTAIR1

    Description

    These Stringers are available within our Premium Stair range.

    Includes:

    • This item includes pair of stringers.
    • Batten screws and DOES NOT INCLUDE the treads.
    • Made using 290 x 45mm LOSP pine (environmentally friendly timber).
    • 1 x pair of 1 tread Stringers Included HEIGHT 330mm.
    • DISTANCE FROM ELEVATED PLATFORM 380mm
    • 4 x Galvanised 5mm HEX drive Batten screws per tread included.
    • TREADS NOT INCLUDED.
    • ASSEMBLY INSTRUCTIONS INCLUDED.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Also available in full kit form - including treads and sawtooth when required. Any width available, from 900mm – 5400mm. Please search product code KLPRSKIT Custom made height rises also available.

Go to Top