• Code: KLSAW1

    Description

    The Sawtooth Centre Supports are available within our Domestic Stair range.Made using 240 x 45mm LOSP pine (environmentally friendly timber).

    Includes:

    • 1 x 1 Tread Sawtooth TO SUIT 240 GOING x 165mm
    • STEP RISE 2 x Galvanised 5mm HEX drive Batten screws per tread included.
    • Treads Not Included
    • Assembly Instructions included.
    These centre supports are not commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. The Sawtooth’s are the perfect support for any staircase that will be over 1200mm wide.Great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • Code: KCSKIT

    Description

    The complete DIY kits are available in any width from 900mm wide – 5400mm wide. And for any rise and run. Made using 240 x 45mm CCA PINE.

    Includes:

    • Stringers.
    • Treads and sawtooth - when over 1200mm wide.
    • 4 x Galvanised 5mm HEX drive Batten screws per tread.
    • Extra screws provided when sawtooths required.
    • Assembly Instructions included.
    These steps are NOT commercial grade but are Building Codes Australia (BCA) compliant for domestic use only. These kits are great for any outdoor areas.

    Such As:

    • Front or rear entrance to homes.
    • On timber decking’s or within any undulating landscape.

    Application

    Custom made height rises also available.

  • Code: KMFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using MERBAU.

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
  • Code: KLFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Code: KLFPANELR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP PINE (environmentally friendly timber).

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Code: KMFPANELL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Code: KMFPANELR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom sizes catered for.
  • Code: KLFPOSTS1200

    Description

    These 88 x 88 x 1200mm posts are available in our Domestic stair range. Made using LOSP Pine (environmentally friendly timber).

    Includes:

    • 2 Coach bolts with nuts and washers provided per post.

    Application

    Custom sizes catered for.
  • Code: KLFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Code: KLFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from LOSP Pine.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Code: KMFLIGHTL

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
  • Code: KMFLIGHTR

    Description

    These Flight handrails are available to suit any of our stringer range. Made from MERBAU.

    Includes:

    • Pre-assembled Flight Panel (using 130mm x 42mm railing & 42mm x 32mm uprights).
    • 88 x 88 x 1200mm newel posts.
    • Required amount of Galvanised 5mm HEX drive Batten screws.
    • 2 Coach Bolts with nuts and washers per post.
    • DIY Instructions.
    Available for 2 – 18 Steps. Choose Left or Right side by standing at the bottom of the stairs.

    Application

    Custom made height rises also available.
Go to Top