Get in touch1300 547 581
Get in touch[email protected]
Made to measure in Bayswater · Shipped Australia-wide · Pickup available 03 9720 7266

Choosing fixed timber louvres for your home

Choosing fixed timber louvres for your home

A louvre panel can take the glare off a window or give a verandah a little more privacy without closing the space in completely. Before choosing one, spend a moment at the opening. Look at where the sun comes from, what you want to screen and how much of the view you would like to keep. Those details matter more than choosing a panel from a small photograph.

First, decide whether the blades need to move

Karem’s timber louvres have fixed blades. They stay at their manufactured angle. That suits a permanent screen, but it is a different choice from an adjustable shutter whose blades you tilt during the day. If opening and closing the blades is part of your plan, explain that before asking for a quote.

A photograph taken from inside the room is useful, along with one from outside. Show any handles, downpipes, sills or nearby walls. The panel needs to work in that particular opening, not just look right from the street.

Choose the panel construction as well as the size

The TIML louvre panel uses 85 × 17 mm slats in a 90 × 42 mm frame. The window-louvre calculator shows a lighter panel with 32 × 9 mm slats and a 42 × 35 mm frame. They are different specifications, so include the product or calculator reference when you contact us.

For the lighter panel, you can enter heights from 900 to 2,400 mm and widths from 300 to 1,500 mm in the timber louvre preview and price calculator. The drawing changes with your dimensions. Timber choices include treated pine and Western Red Cedar, with availability and suitability confirmed when the workshop reviews the job.

Keep opening measurements and panel measurements separate

Measure the clear width at the top, middle and bottom, then the height at both sides. Write down all the readings in millimetres. If the panel will sit inside the opening, record the available depth too. For a face-mounted panel, show the area it needs to cover and the fixing surface around it.

Do not quietly subtract an allowance and send the reduced figure as the opening size. Label the opening measurements, then have your fitter confirm the finished panel dimensions and clearances. Our louvre measuring checklist helps keep those details together.

Use the preview to get the conversation started

The calculator provides a GST-inclusive estimate for its window-panel specification. Pricing rounds up to the next listed size, while the dimensions you entered remain your requested panel size. It is a starting point for the quote, not a fabrication drawing or a promise about installation and freight.

Send the photos, measurements, quantity and postcode with your louvre enquiry. If several openings look the same, measure each one anyway. A few millimetres of difference is much easier to deal with before the timber is made.

Talk to the workshop

Tell us about your project. Call 03 9720 7266 or 1300 547 581, or send us the details below.